DTF Hot Peel Film - 24" x 328FT (60cm x 100m)

🧴 Instructions for Using DTF Remover

1. Transfer Solution Into Spray Bottle

   • Use a clean spray bottle (preferably a fine-mist type).

   • Pour the remover solution in—don’t dilute unless the product label specifically recommends it.

2. Test First

   • Spray a little on a hidden area of fabric to make sure it won’t discolor or damage material.

3. Apply to Target Area

   • Hold bottle 6–8 inches away.

   • Lightly mist the remover onto the area where you need the DTF adhesive or print residue removed.

   • Avoid oversaturating the fabric.

4. Let It Work

   • Wait 1–3 minutes (or follow product instructions).

   • The remover will soften the adhesive or ink.

5. Rub or Scrape Gently

   • Use a clean cloth, soft brush, or scraper tool to lift away the softened powder/resin.

   • Repeat if needed for stubborn areas.

6. Clean & Dry

   • Wipe the area with a damp cloth to remove leftover remover solution.

   • Allow fabric to air-dry completely.

⚠️ Safety Tips

• Always wear gloves (and ideally a mask if spraying a lot).

• Use in a well-ventilated area.

• Don’t mix with other chemicals.

• Keep away from heat, flames, or kids/pets.